To retrieve data from your system or hard drive is very essential if the data is important. If the data that need to recover is official, then the process to recover becomes even more important and need to be done considering the data safety aspect as well. RAID recovery is used to recover lost data. Storage is another part of fault tolerance if something were to happen to a company data such as disk failure there are results in data loss basically the raid recovery here .
RAID 0:
It is all about speed and it contributes nothing to reliability minimum two disks required for implementing RAID 0, for example, we have a data can be stored when data will be accessing the reliability performance is zero in this the units will be separated in blocks and RAIDS across the number of disks.
RAID 1:
This level is known as mirroring it copies two disks simultaneously the data placed in multiple disks it is also called as data mirroring it automatic data backup as there will be duplication of data and no loss data at any point read request executed in either of the two disks written request to both disk will be updated in parallel recovery from failure will be that simple if one drive fails you just have the data access from the second drive.
RAID 10:
It is combining RAID 0 and RAID 1 which offers high performance than RAID 1 but much higher cost it involved data is organized stripes across multiple disks and then striped disk set is mirrored data is mirrored and the mirrors are striped
How to rebuild a RAID 5 array with one drive down?
You have a RAID 5 that has failed and you need to get your data back online the first thing you need to do this is shut down your device normally RIDE 5 array can close one drive without having to worry too much it is not recommended to operate in this degraded state for very long at all before replacing the failed drive if one drive has failed you take the failed drive out and replace it with a good drive of the same capacity the RAID should rebuild itself that’s the beauty of RAID 5 now if you have two drives down you need to call a RAID recovery company with experience n recovering RAIDS
Some points to remember when rebuilding RAID 5:
You have a greater chance of second drive failure during the rebuilding process so you need to pay close attention while this is happening if the rebuilding process fails this more than likely what happened if a rebuild seems to take more time than it should there could be a serious problem.
Advantages of RAID:
Data loss will be very dangerous in the organization while using the RAID concept we can reduce the data loss RAID technology provides data loss prevention due to loss of failure RAID technology can provide in hardware and software you can have storage in hardware or we can use to implement in software